Datasheet4U Logo Datasheet4U.com

EM200 - Ethernet Module

Description

can be found in the Device Server Application Firmware Manual.

This EM200 Ethernet Module Manual focuses on the hardware portion of the EM200.

©2000-2004 Tibbo Technology Inc.

Features

  • a serial port (RX, TX lines) and several general-purpose I/O lines (P0-P8). All of the above lines are of CMOS type. From the hardware point of view, all general-purpose I/O lines can serve as inputs or outputs. Maximum load current for all CMOS lines is 10mA. Simplified structure of EM200's I/O lines is shown on the circuit diagram below. All lines are "quasi-bidirectional" and can be viewed as open collector outputs with weak pull-up resistor. There is no explicit direction control. To "measur.

📥 Download Datasheet

Datasheet preview – EM200

Datasheet Details

Part number EM200
Manufacturer Tibbo Technology
File Size 208.79 KB
Description Ethernet Module
Datasheet download datasheet EM200 Datasheet
Additional preview pages of the EM200 datasheet.

📁 Similar Datasheet

  • EM2 - Transmissive Optical Encoder Module (US Digital)
  • EM2 - RECTIFIER DIODES (EIC)
  • EM2 - General-purpose Rectifier Diode (Sanken electric)
  • EM2-DINAV53xxx - Panel Meters and Controllers Power Analyzers and Energy Meters (Carlo Gavazzi)
  • EM2120H01QI - Step-Down DC-DC Switching Converter (Intel)
  • EM2120L01QI - Step-Down DC-DC Switching Converter (Intel)
  • EM2130H01QI - Step-Down DC-DC Switching Converter (Intel)
  • EM2130H01QI - Power SoC (Intel)
  • EM2130L01QI - Step-Down DC-DC Switching Converter (Intel)
  • EM2130L02QI - Power SoC (Intel)
Other Datasheets by Tibbo Technology

    Full PDF Text Transcription

    Click to expand full text
    EM200 Ethernet Module The EM200 is an Ethernet Module for onboard installation. Module hardware includes one 100BaseT Ethernet port (standard Ethernet magnetics are NOT integrated into the Module), one serial port (CMOS-level) with a number of additional generalpurpose I/O lines, and an internal processor, whose firmware acts as a bridge between the Ethernet and serial ports. Ethernet "side" of the Module connects directly to a standard Ethernet magnetics circuit (such as YCL-PH163112) or RJ45 connector with integrated magnetics. Serial "side" interfaces directly to the serial port pins of most microcontrollers, microprocessors, UARTs, etc.
    Published: |